JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
This blog introduces you to the steps of installing ekrcover car seat covers in detail, providing comprehensive guidance from preparation to installation of each seat, helping you to easily install seat covers for your car and improve the beauty and comfort of the interior.When installing a custom seat cover, first ensure it matches your vehicle's seat model.
Confirming Seat Cover CompatibilityThe first step in installing ekrcover car seat covers is to ensure they fit your vehicle perfectly. The diverse range of car models results in varying seat shapes, sizes, and structures, so ensuring the correct fit ensures a smooth installation and optimal performance.
You can confirm compatibility in the following ways:
Preparing Installation Tools
To successfully install your ekrcover car seat cover, it's crucial to have the necessary tools. Your seat cover includes:Illustrated manual
A Installation Tool （As shown in the image）
Here are some tools you might need and their uses:
Wrench and screwdriver: If your car seat requires disassembly to install the cover, a wrench and screwdriver will come in handy. For example, some rear seats may require loosening retaining screws. Using the appropriate sized wrench and screwdriver ensures safe and convenient removal and installation. During disassembly, be sure to keep screws and other small parts safe to avoid losing them.
Flashlight: Some nooks and crannies in your car are dimly lit, so a flashlight can provide ample illumination to help you inspect the seat's structure and installation details. For example, at the bottom of the seat cover or in the gap between the rear seats, a flashlight can help you accurately locate the fixing points and ensure the cover is securely installed.
Cleaning cloth and detergent: Before installing seat covers, clean the seat surface. A cleaning cloth and detergent can help remove dust, stains, and grease. When using detergent, dilute and use according to the product instructions to avoid damaging the seat material. After cleaning, wipe the seat dry with a cleaning cloth to ensure the surface is dry and clean.
Cleaning the Seats
Before installing your ekrcover car seat covers, be sure to thoroughly clean the seats. A clean seat surface not only ensures smooth installation but also extends the life of both the seat and the cover.
Removing Debris: First, remove any debris from the seats, such as documents, beverage bottles, and small ornaments, and set them aside. This step allows you to more thoroughly inspect the condition of the seats and prevents damage to the seat covers during installation.
Vacuuming: Vacuum the seats thoroughly, focusing on removing dust, hair, and debris from the seat surfaces, crevices, and backrests. If your vacuum cleaner comes with different nozzles, choose one suitable for crevices and corners to ensure every corner is cleaned.
Removing Stains: For stains on the seats, choose the appropriate cleaning method based on the type of stain. For general dust and stains, gently wipe with a damp cloth and a small amount of neutral detergent. For example, for stains left by food residue, wipe with a damp cloth and then dry with a clean, dry cloth. For stubborn stains, such as oil or ink, use a specialized car seat cleaner. Before using the cleaner, test it on a small, inconspicuous area of the seat to ensure it won't discolor or damage the seat material. Then, follow the cleaner's instructions: spray the stain, gently scrub with a soft-bristled brush, and finally wipe clean with a damp cloth.
Drying the Seats: After cleaning, let the seats air dry or wipe them dry with a clean towel. Ensure the seats are completely dry before installing the seat covers to prevent moisture from being trapped between the cover and the seat, which can cause mold, odor, and other problems.
We recommend using a 1:7 ratio of cleaner to water (as shown).
Installation Tutorial
Visit our installation guide on YouTube：Our official account will have video tutorials on installing seat covers for each brand and model. By watching the video, you can have a more intuitive understanding of the installation process and techniques, learn from other users' installation experience, and help solve the installation problems you encounter.
Optional Professional Help & Store installation：Installing seat covers can be difficult for one person, so you can ask family or friends for assistance. For example, when installing rear-row, one-piece seat covers, two people can simultaneously lower the cover from either side. This helps keep the cover flat and allows for a smoother installation. Alternatively, you can seek professional assistance.
Our company is located at 9860 Rush Street, South El Monte, CA 91733 USA. Please call 626-748-2788 in advance for an appointment. (Monday to Saturday, 9:00 AM to 5:30 PM)
Installation fee: Generally, 5 seats are $80 and 7 seats are $100. Charged depending on the seat and the actual situation.
Installation time:Most customers can complete the installation within 1-2 hours.
Installation Inspection: Custom seat covers are designed with every detail of the seat in mind, including the seat cushion, backrest, backrest, and armrests, to ensure a perfect fit. After installation, carefully inspect the seat cover to ensure every detail is intact. For example, check that the cover completely covers the seat and is not uneven or loose. You can also gently press the cover to confirm it is securely in place.
Newly installed car seat covers may have some odor, which is normal. You can effectively remove odors by following these methods:
Airing and drying: Park your car in a well-ventilated area with all doors and windows open to allow fresh air to circulate and remove odors from the seat covers. If conditions permit, you can also remove the seat covers and air them in a well-ventilated area, but be careful to avoid direct sunlight to prevent fading or damage. Airing and drying is a simple and effective method. For mild odors, a few days of airing will usually significantly reduce them.
Using activated carbon: Activated carbon has a strong adsorption capacity and can effectively absorb odor molecules emitted by seat covers. You can place activated carbon bags in your car, such as on the seats and in the trunk. Regularly replace the activated carbon bags to maintain their adsorption effectiveness. Replacing the activated carbon bags regularly will continuously purify the air in your car and remove seat cover odors.
Place fruit peels: Fruit peels like lemons, oranges, and grapefruits have a naturally refreshing aroma, so place some in your car to improve the odor. Placing the peels in a corner or cup holder will not only release a fresh, fruity aroma but also mask any odor from the seat covers. However, be sure to replace the peels promptly to prevent them from rotting and creating new odors.
Use an air purifier: Install an air purifier in your car to filter out odors, dust, and harmful particles, effectively improving the air quality inside your car. Choose an air purifier with high-efficiency filtration and use it correctly according to the instructions. This will help remove seat cover odors more quickly and leave the air in your car fresher.
The cleaning method for ekrcover seat covers varies depending on the material used. Here are some common cleaning methods and precautions:
Cleaning Frequency: We recommend cleaning your seat covers based on actual use and the degree of soiling. If you frequently use your car, your seat covers are prone to stains, so you may need to clean them every one to two months. If your car is used less frequently and your seat covers are relatively clean, you can extend the cleaning interval.
Cleaning Method:
Fabric seat covers: First, vacuum the surface of the seat cover to remove dust and debris. Then, prepare an appropriate amount of warm water, add neutral detergent, and stir well. Soak the seat cover in the solution for 15-30 minutes to dissolve the stains. For heavily soiled areas, gently scrub with a soft brush, being careful not to apply excessive pressure to avoid damaging the fabric fibers. After scrubbing, rinse the seat cover thoroughly with clean water until no foam remains. Finally, squeeze out the seat cover and air dry in a well-ventilated area, away from direct sunlight.
Leather seat covers: Do not soak directly in water to clean. First, wipe the surface of the seat with a clean, damp cloth to remove dust and stains. Then, use a dedicated leather cleaner and apply it to the seat according to the product instructions. Gently wipe with a soft, dry cloth to remove any remaining stains and detergent. Regularly apply maintenance oil to the leather seat covers to maintain the leather's softness and luster, extending the life of the seat covers.
Plush seat covers: First, comb the lint to keep it smooth, then thoroughly vacuum it. For localized stains, use a dedicated lint cleaner. Spray the cleaner on the stain, gently wipe with a clean, damp cloth, and allow the seat cover to air dry.
Canvas seat covers: Remove dust with a soft brush and allow the area to air out to remove odors. Gently brush stains with a neutral detergent. Sprinkle baking soda on oil stains. Treat sweat stains with cold water. Remove and wash every two to three months, preferably by hand, rubbing gently in cold water and drying in the shade. Avoid harsh detergents, high temperatures, exposure to the sun, and using trimmers for pilling.
Note:Check the seat cover label: Before washing your seat cover, always check the care label to understand the material and cleaning requirements, and wash it strictly according to the label.
Avoid strong rubbing: When washing easily deformed or damaged materials like silk and suede, be especially gentle. Avoid pulling or rubbing vigorously to prevent deformation or damage.
Control the water temperature: Generally, the water temperature for washing seat covers should be between 30°C and 40°C. Excessively high water temperatures may cause the seat covers to shrink, fade, or deform.
Choose the right detergent: Use a neutral detergent and avoid strong acids or bases, as these can damage the seat cover's fibers and affect its quality and lifespan.
Drying Method: After washing, dry the seat covers in a well-ventilated, cool, and shady area away from direct sunlight to prevent fading and aging.
Every step in the car seat cover installation process is crucial, from confirming the car model, preparing tools, and cleaning the seats, to actually installing the front and rear seat covers, handling special situations, performing post-installation inspections and adjustments, and performing subsequent cleaning and maintenance.
We look forward to your successful car seat cover installation, giving your car a brand new look. If you have any installation tips, or experience resolving problems, please share them with us. Your feedback will not only help other car owners better install their seat covers, but also allow us to continuously improve our products and services.
Also, if you encounter any problems during installation, or have any questions or suggestions about our car seat covers, please feel free to let us know. Your feedback is our driving force. We will do our best to answer your questions and provide assistance, striving to ensure that every customer enjoys high-quality products and a satisfying service experience. Let's create a better car interior together!
